Alfa Network SoLo51 Bedienungsanleitung

SoLo51 802.11bg Outdoor WISP AP/CPE User’s Manual Version 2.0

2.5.1 Standard Pole Mount SoLo 51 support vertical and horizontal potions pole mounting. Please follow the procedure below to install:

2.5.2 Optional SoLo51 Antenna Adjustable Mounting With Optional Antenna Adjustable Mounting could easy to adjust better angle position to connect to

Configuring the SoLo51 Configuring the IP address of your computer In order to manage with SoLo51, you have to configure the IP addresses of your c

3. Choose Internet Protocol (TCP/IP) and click Properties. 4. Choose “Use the following IP address” to specify IP addresses manually. Fill in the

Starting the WEB-Based Management Interface The device uses WEB as the management interface. You can use a browser to access the management interface

Web Management SoLo51 In this chapter, we will explain about the wireless settings and router mode settings in web management interface. With the w

Here will explain all web page functions In system page System Settings Password Setting Backup & Restore Syslog Settings F

WAN Page: work on in Router Mode Bridge Mode doesn’t support WAN setting LAN Settings: 1. LAN configuration: allow to choose DHCP C

Wireless 1 Settings: 1. Wireless configuration:  Wlan Mode: AP+WDS Parent: AP master mode.  Client: Wireless client mode for router  WDS child:

Introduction 1.1 Overview The SoLo51 is a wireless outdoor multi-function device based on IEEE 802.11b/g 2.4GHz radio technologies. When installe

Wireless 2 Settings: 1. Wlan Mode: AP+WDS Parent: AP master mode. 2. Broadcast SSID: broadcast SSID to every clients 3. Transmit power: change the

Repeater Settings: 1. WDS Repeater: if enable WDS repeater will set system operation mode in repeater mode and set wireless 1 in WDS child mode. If

QoS Settings: Maximum Upload/Download: setup the WAN/LAN maximum sustained upload and download speeds in kilobits. SNMP Settings: 1. SNMP Commun

DMZ Settings: DMZ service: DMZ(Demilitarized Zone) is a network area (a subnetwork) that sits between an organization’s internal network and an ext

Status: 1. System: show the SoLo51 current setting 2. Events log: show the SoLo51 events log 3. DHCP Clients: show the client list who access to S

SoLo51 – WISP Client Mode Setup Support DHCP Client, PPPoE Client, Static IP and SNMP (Simple Network Management Protoc

Select “Start With WISP Setup” Push “ Scan AP ” button to search the AP or Manually to type the WISP AP’s name into “ SSID Name of

If choosing the “Scan AP” will pop-up the AP Scan Window, choose the one you would want to access from the list then double click the mo

Choose the Connection Type which connect to WISP Base Station Tower ** In this demo case, we will choose “PPPoE” to connect to W

To choose Enable or Disable “ DHCP NAT Routing “ Finish the Wizard Reboot the SoLo51

1.4 Features  Atheros AR-2315 802.11bg chipset  8MB Flash and 32MB SDRAM  5 wireless multi-function modes: Access Point (WDS parent), Bridge

Finished WISP setting

1.5 Wireless Operation Modes The SoLo51 can perform as a multi-function wireless device. Through the web interface, users can easily select which

1.5.5 Client Infrastructure Mode This mode is also known as “Client” mode. In Client Infrastructure mode, the SoLo51 acts as if it is a wireless

1.5.8 AP Router Mode In AP Router Mode, the SoLo51 behaves like a wireless router. The LAN port of the SoLo51 will become WAN port. The wireless netw

Installing the SoLo51 This section describes the hardware features and the hardware installation procedure for the SoLo51. For software configu

2.2 Package Content The SoLo51 package contains the following items: „ One SoLo51 main unit „ One 18V 1A DC power adapter „ Passive PoE DC Inject

2.5 Hardware Installation 1. Plug Power adapter into APoE02-WM 2. Connect RJ45 ( LAN Port ) to computer or Switch 3. Connect RJ45 (PoE Port) t